How It Is Made

Once a year, the soft, white wool is harvested from sheep, and the process of transforming this naturally renewable resource into a wide selection of fibers, fabrics and yarns begins. All the wool is carefully and specially milled without the use of harsh chemicals or extreme temperatures, making every effort to maintain the natural integrity of this comfortable, soft, and pure perfection. With palettes of richly saturated solids and precisely blended heathers, Imperial Yarn offers knitters, weavers, designers and other fiber artists a naturally beautiful array of hues, textures, and weights from which to choose.

 

 

 

 

 

 

 

Step One: Shearing

 

The unique wool fashion of Imperial Yarn begins with shearing. Shearing takes place in early spring. Using electric shears, the expert shearers carefully harvest the fleece of each sheep or alpaca, which comes off in one piece, ready to toss onto the skirting table.

 

Step 2: Skirting & Grading

 

Each individual fleece is carefully inspected on a “skirting table,” where unusually dirty wool located on the belly or other areas is removed, and the Sheep’s wool and Alpaca Fiber is “classed or graded” according to the diameter (fineness) and length of the fibers. The wool and fiber is baled by grade for shipping.

Step Three: Washing & Scouring

 

Next the wool is washed in hot water with a mild detergent, removing grease, vegetable matter and dirt from the raw wool. Moving through a series of cleaning tubs, followed by clean-water rinses, the fleece is then dried. These methods are earth friendly, involving no harsh chemicals, leaving the wool in its naturally soft state. Imperial Yarn also “cards and combs” the wool prior to spinning, which helps remove any remaining vegetable matter from the wool fibers.

 

Step Four: Stock Dyeing

 

The wool is dyed prior to spinning in most of our woolen spun yarns. This allows us to take various colors and blend them together during the next stage, resulting in soft and uniquely blended custom heather colors. For most of our worsted spun yarns, the dyeing happens once the fibers have been spun to yarn.

 

Step Five: Carding & Blending

 

Carding is a process during which wire rollers straighten out the fibers to prepare it to be spun. At this point, our various dyed fibers are blended to create the final Imperial Yarn color palette. The untangled wool fibers lie parallel and form a fine web of continuous strips or “slivers.” Carded wool, prior to spinning, is referred to as roving.

  

 

Step Six: Spinning/Plying

 

The spinning process takes the roving and twists it into thread or yarn. Twisting the wool strands increases the strength of the yarn and creates the continuous, unbroken yarn necessary for weaving or knitting into cloth. The additional step of plying involves twisting multiple strands of spun fiber together, to create plied yarns (e.g. 2-ply or 3-ply).

  

 

Step Seven: Weaving

 

Once the finished yarn reaches the weaving facility, the weaver readies the machine by warping the loom with 100 cones of yarn, which is a very timely process. Once this is complete, the machine is now ready to begin weaving beautiful cloth and fine fabrics under the watchful eye of the weaver.  When the fabric is woven, it is then placed on rolls and readied for finishing.

   

 

The Final Step: Finishing & Packaging

Our woven blankets are finished in a variety of ways depending on the style…Scoured, napped, brushed, blanket-stitched or fringed, depending on the style. Each one is then labeled, packaged and ready to present to our customers. All Imperial Yarn products are proudly 100% American Made from 100% American Grown Fiber.